Technical Data Sheet
Product Description

NATPET polypropylene grades for healthcare applications are produced under controlled conditions to ensure consistent quality and contamination free resins.

H12ML-MG is a Homopolymer for injection molding application. Produced using Spheripol® technology, the grade has an exceptional advantage of having morphologically uniform resins, medium flow ability and high stiffness.

It is recommended that all potential activities for applications of this grade in the healthcare area have to be discussed with the relevant technical and business representative of NATPET particularly for use of this product in an implantable device that is introduced into the human body by surgical intervention and is intended to remain in place following surgical procedure.

Product Description
Injection Molding

PropertiesConditionsMethodValueUnitTechnical Data Sheet Material Safety Data sheet Regulatory Compliance Product Declaration
Density23°CISO 11830.900g/cm3pdfpdfpdf
Melt Flow Rate (MFR)230°C/2.16 kgASTM 1238-1312g/10-min
Flexural ModulusISO 1781,500MPa
Tensile Modulus1-mm/min
ISO 5271,550
Tensile Stress at Break50-mm/minISO 52726MPa
Tensile Strain at Yield50-mm/minISO 52735MPa
Tensile Strain at Break50-mm/minISO 527> 50%
Tensile Strain at Yield50-mm/minISO 52713%
Izod Notched23°CISO 180 3.9kJ/m2
Heat Deflection Temperature0.45 MPa Un-annealedISO 75B91°C
Vicat Softening TemperatureA50 (50°C/h 10N)ISO 306152°C
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.