Teldene® H17ML

HOMOPOLYMER Teldene® H17ML

Technical Data Sheet
Typical Applications
• Used for the production of thin-walled articles, containers, boxes, caps & closures, household articles and toys
• Components for compounding applications


Key Characteristics
• Medium-high fluidity
• Easy mold filling
• Short cycle times
• Good dimensional stability and high stiffness
• Food contact approval for specific applications (refer to NATPET)

Processing Method
• Injection Molding

ResinConditionsMethodValueUnitTechnical Data Sheet Material Safety Data sheet Regulatory Compliance Product Declaration
Density23°CISO 11830.900g/cm3pdfpdfpdf
Melt Flow Rate (MFR)230°C/2.16 kgASTM 1238-1316g/10-min
Mechanical
Flexural ModulusISO 1781,550MPa
Tensile Stress at Yield50-mm/minISO 52735MPa
Tensile Strain at Yield50-mm/minISO 52713%
Izod Notched23°CISO 180
3kJ/m2
Thermal
Heat Deflection Temperature0.45 MPa Un-annealedISO 75B115°C
Vicat Softening TemperatureA50 (50°C/h 10N)ISO 306155°C
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.

Special Features
Shows broad processing window while providing good mechanical properties

Processing Conditions
Average extruder temperature range may be kept between 240 – 260°C.

Food Regulation
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.

Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received. Please refer to “Material Safety Datasheet” (MSDS) for handling and storage information.

Documents
Legal documents, MSDS, trial reports and machine builder certificate are available on request. Please send your request to the following e-mail: pa@natpet.com

*To download the TDS, MSDS or RCPD of this grade please click on Download PDF button