Teldene® H12ML

Technical Data Sheet
Typical Applications
• Used for the production of Furniture, Crates, Containers, Caps and Closures
• General purpose injection molding application


Key Characteristics
• Good fluidity, High Stiffness
• Food contact approval for specific applications (refer to NATPET)

Processing Method
• Injection Molding

ResinConditionsMethodValueUnitTechnical Data Sheet Material Safety Data sheet Regulatory Compliance Product Declaration
Density23°CISO 11830.900g/cm3pdfpdfpdf
Melt Flow Rate (MFR)230°C/2.16 kgASTM 1238-1312g/10-min
Mechanical
Flexural ModulusISO 1781,500MPa
Tensile Modulus1-mm/minISO 5271,550MPa
Tensile Stress at Break50-mm/minISO 52726MPa
Tensile Stress at Yield50-mm/minISO 52735MPa
Tensile Strain at Break50-mm/minISO 527> 50%
Tensile Strain at Yield50-mm/minISO 52713%
Izod Notched23°CISO 180
3.9kJ/m2
Thermal
Heat Deflection Temperature0.45 MPa Un-annealedISO 75B91°C
Vicat Softening TemperatureA50 (50°C/h 10N)ISO 306152°C
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.

Special Features
Shows broad processing window while providing good mechanical properties

Processing Conditions
Average extruder temperature range may be kept between 240 – 260°C.

Food Regulation
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.

Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received. Please refer to “Material Safety Datasheet” (MSDS) for handling and storage information.

Documents
Legal documents, MSDS, trial reports and machine builder certificate are available on request. Please send your request to the following e-mail: pa@natpet.com

*To download the TDS, MSDS or RCPD of this grade please click on Download PDF button