Teldene® H11BF

HOMOPOLYMER Teldene® H11BF

Technical Data Sheet
Typical Applications
• Food Packaging Film
• Textile Packaging Film
• Potential end user applications include packaging for hosiery, shirts, other textiles and shopping bags
• Especially suitable for water quenched tubular film (IPP)


Key Characteristics
• Excellent anti-blocking properties
• High clarity
• Good processability
• Good stiffness
• High slip
• Food contact approval for specific applications (refer to NATPET)

Processing Method
• Blown Film
• Injection Molding

ResinConditionsMethodValueUnitTechnical Data Sheet Material Safety Data sheet Regulatory Compliance Product Declaration
Density23°CISO 11830.900g/cm3pdfpdfpdf
Melt Flow Rate (MFR)230°C/2.16 kgASTM 1238-1311g/10-min
Mechanical
Flexural ModulusISO 1781,450MPa
Tensile Stress at Yield50-mm/minISO 52735MPa
Tensile Strain at Yield50-mm/minISO 52710%
Izod Notched23°CISO 180
2.5kJ/m2
Thermal
Heat Deflection Temperature0.45 MPa Un-annealedISO 75B94°C
Vicat Softening TemperatureA50 (50°C/h 10N)ISO 306155°C
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.

Special Features
Shows broad processing window while providing good mechanical properties

Processing Conditions
Average extruder temperature range may be kept between 220 – 230°C. Quench temperature 33°C

Food Regulation
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.

Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received. Please refer to “Material Safety Datasheet” (MSDS) for handling and storage information.

Documents
Legal documents, MSDS, trial reports and machine builder certificate are available on request. Please send your request to the following e-mail: pa@natpet.com

*To download the TDS, MSDS or RCPD of this grade please click on Download PDF button