Technical Data Sheet
• Used for the production of consumer goods such as food containers, house wares, toys and garden furniture
• Components for appliances and parts for the automotive industry
• Good flow properties, High Stiffness, easy processing
• Food contact approval for specific applications (refer to NATPET)
• Injection Molding
|Melt Flow Rate (MFR)||230°C/2.16 kg||ASTM 1238-13||9||g/10-min|
|Flexural Modulus||ISO 178||1,500||MPa|
|Tensile Stress at Break||50-mm/min||ISO 527||24||MPa|
|Tensile Stress at Yield||50-mm/min||ISO 527||34||MPa|
|Tensile Strain at Break||50-mm/min||ISO 527||> 50||%|
|Tensile Strain at Yield||50-mm/min||ISO 527||13||%|
|Izod Notched||23°C|| ISO 180||4.4||kJ/m2|
|Heat Deflection Temperature||0.45 MPa Un-annealed||ISO 75B||115||°C|
|Vicat Softening Temperature||A50 (50°C/h 10N)||ISO 306||155||°C|
|Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.|
Shows broad processing window while providing good mechanical properties
Average extruder temperature range may be kept between 240 – 260°C.
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.
Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received. Please refer to “Material Safety Datasheet” (MSDS) for handling and storage information.
Legal documents, MSDS, trial reports and machine builder certificate are available on request. Please send your request to the following e-mail: email@example.com
*To download the TDS, MSDS or RCPD of this grade please click on Download PDF button