Teldene® B07ML

Heterophasic Copolymer Teldene® B07ML

Technical Data Sheet

Typical Applications

• Used for the production of injection molding products requiring a good resistance to long term heat exposure, especially for battery cases, automotive components and large containers.

• Automotive compounding applications


Key Characteristics
• Medium fluidity
• Good balance of impact and stiffness
• Low warpage tendency
• Good heat aging resistance
• Good dimensional stability
• Formulated with a highly effective heat stabilization package
• Food contact approval for specific applications (refer to NATPET)

ResinConditionsMethodValueUnitTechnical Data Sheet Material Safety Data sheet Regulatory Compliance Product Declaration
Density23°CISO 11830.900g/cm3pdfpdfpdf
Melt Flow Rate (MFR)230°C/2.16 kgASTM 1238-137g/10-min
Mechanical
Flexural ModulusISO 1781,110MPa
Tensile Modulus1-mm/minISO 5271,200MPa
Tensile Stress at Yield50-mm/minISO 52727MPa
Tensile Strain at Break50-mm/minISO 527> 50%
Tensile Strain at Yield50-mm/minISO 5277%
Charpy Un-notched23 °C, Type 1, EdgewiseISO 179No BreakkJ/m2
0 °C, Type 1, EdgewiseISO 179140kJ/m2
-20 °C, Type 1, EdgewiseISO 17980kJ/m2
Charpy Notched23 °C, Type 1, EdgewiseISO 1797.5kJ/m2
0 °C, Type 1, EdgewiseISO 1794.5kJ/m2
-20 °C, Type 1, EdgewiseISO 1793.5kJ/m2
Izod Notched23°CISO 180

5.4%
Thermal
Heat Deflection Temperature0.45 MPa Un-annealedISO 75B70°C
Vicat Softening TemperatureA50 (50°C/h 10N)ISO 306148°C
Optical
Haze1.0 mm
ASTM D 1003
6.0
%
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications.

Technical Data Sheet
Special Features
Amazing result on battery cases articles
Broad processing window, excellent flowability at optimized molding temperatures

Processing Conditions
Average extruder temperature range may be kept between 190 – 210°C.

Food Regulation
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.

Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received. Please refer to “Material Safety Datasheet” (MSDS) for handling and storage information.

Documents
Legal documents, MSDS, trial reports and machine builder certificate are available on request. Please send your request to the following e-mail: pa@natpet.com

*To download the TDS, MSDS or RCPD of this grade please click on Download PDF button